Shop by Type · 36 displays
Spring-loaded banners that retract into an aluminum base for travel. The lowest-cost, fastest-setup branded surface on the market.
Most popular →
Blizzard Outdoor Banner Stand
4.9 ★
Google reviews
Canadian-owned
Etobicoke · 20+ years
Free design
2 rounds included
1-day quote reply
Real humans
Ships Canada + US
Same-week GTA
NFPA 701 fire-rated
Cert included
Who this is for
BC-0431
Quote on request →
BC-0434
Quote on request →
BC-0481
Quote on request →
BC-0490
Quote on request →
BC-0491
Quote on request →
BC-0492
Quote on request →
BC-0493
Quote on request →
BC-0494
Quote on request →
BC-0495
Quote on request →
BC-0496
Quote on request →
BC-0497
Quote on request →
BC-0498
Quote on request →
BC-0499
Quote on request →
BC-0500
Quote on request →
BC-0501
Quote on request →
BC-0502
Quote on request →
BC-0503
Quote on request →
BC-0504
Quote on request →
BC-0505
Quote on request →
BC-0506
Quote on request →
BC-0507
Quote on request →
BC-0508
Quote on request →
BC-0509
Quote on request →
BC-0510
Quote on request →
BC-0511
Quote on request →
BC-0512
Quote on request →
BC-0513
Quote on request →
BC-0514
Quote on request →
BC-0515
Quote on request →
BC-0516
Quote on request →
BC-0517
Quote on request →
BC-0518
Quote on request →
BC-0519
Quote on request →
BC-0520
Quote on request →
BC-0521
Quote on request →
BC-0522
Quote on request →
About retractable banner stands
A retractable banner stand — also called a roll-up or pull-up — is a heavy aluminum base housing a spring-loaded reel that pulls a printed banner vertically out of its enclosure and locks it to a telescoping pole. Setup is under sixty seconds. Teardown winds the banner back into the housing for storage, where it stays protected from creases, sun, and curious fingers. Most stands weigh four to seven pounds and come with a padded carry bag with shoulder strap.
Standard widths are 24, 33, 36, 48, and 60 inches. The 33-inch is the workhorse — narrow enough to fit beside a 6ft table, wide enough to display a hero image plus key brand messaging. Go to 48 or 60 inches only if the banner must be readable from across a large room or you need to display extensive product information. Above 60 inches, switch to a tension-fabric backwall for better visual presence and weight efficiency.
Single-side stands are 80% of orders — the back is unfinished aluminum and the banner is the only printed surface. Double-side stands have two reels and two graphics, ideal for free-standing locations where attendees walk on both sides (registration kiosks, hallway intersections, conference plenary stages). Double-sided units cost roughly 80% more for the doubled print plus the heavier base required for stability.
Wide-base stands have an extra-heavy foot that resists tipping in high-traffic walkways and is mandatory for some convention insurance riders. Outdoor variants — sometimes called sail stands or breeze banners — use a weighted base or sand bag and replace the spring reel with a fixed pole and grommetted banner, since springs corrode in rain. For outdoor use longer than half a day, prefer a feather flag or sail sign over any retractable stand.
Very. Most units weigh four to seven pounds and come in a padded shoulder bag. They fit easily as carry-on luggage and can be hand-carried from a hotel to a venue.
Yes, if you have a cassette-style stand. The graphic clips into a top and bottom rail and a replacement graphic costs less than half of a full stand. Confirm the cassette model when ordering.
33in × 80in is the universal default and the size we recommend if you are uncertain. Go wider only for high-information panels or large-room visibility. Go narrower if working with very tight table-flanking space.
Standard production is three business days. Rush production at one business day is available for an upcharge on weekday submissions before noon Eastern.
Ready to quote
Pick from the 36 options above and our team replies within one business day.
Start a quote